From f4e5f6bd10e60e42e758da02243e0ee06fae0bd4 Mon Sep 17 00:00:00 2001
From: Maxximiliano Garcia Silva <mgsilva@gmail.com>
Date: Fri, 20 Sep 2024 19:19:11 -0300
Subject: [PATCH] Revert "Add support for esp32"

This reverts commit 3aae26a437842d45b4908de0a58150f496fa3515.
---
 main/cmd_can.c |  2 --
 main/console.c | 57 ++++++++++----------------------------------------
 2 files changed, 11 insertions(+), 48 deletions(-)

diff --git a/main/cmd_can.c b/main/cmd_can.c
index b90e5ef..906bfca 100644
--- a/main/cmd_can.c
+++ b/main/cmd_can.c
@@ -185,7 +185,6 @@ static int canup(int argc, char **argv) {
             break;
     }
     switch (canup_args.speed->ival[0]) {
-        #if CONFIG_IDF_TARGET_ESP32C3
         case 1000:
             t_config = (twai_timing_config_t) TWAI_TIMING_CONFIG_1KBITS();
             break;
@@ -204,7 +203,6 @@ static int canup(int argc, char **argv) {
         case 20000:
             t_config = (twai_timing_config_t) TWAI_TIMING_CONFIG_20KBITS();
             break;
-        #endif
         case 25000:
             t_config = (twai_timing_config_t) TWAI_TIMING_CONFIG_25KBITS();
             break;
diff --git a/main/console.c b/main/console.c
index f691ea2..d7dfaee 100644
--- a/main/console.c
+++ b/main/console.c
@@ -23,9 +23,6 @@
 #include "can.h"
 #include "fs.h"
 #include "xvprintf.h"
-#if CONFIG_IDF_TARGET_ESP32
-    #include "driver/uart.h"
-#endif
 
 #if CONFIG_LOG_COLORS
 static const bool use_colors = true;
@@ -185,61 +182,29 @@ void console_task_interactive(void* arg) {
 void initialize_console(void) {
     /* Disable buffering on stdin */
     setvbuf(stdin, NULL, _IONBF, 0);
-
-    #if CONFIG_IDF_TARGET_ESP32
-        /* Set up UART for the console */
-        const uart_config_t uart_config = {
-            .baud_rate = 115200,
-            .data_bits = UART_DATA_8_BITS,
-            .parity = UART_PARITY_DISABLE,
-            .stop_bits = UART_STOP_BITS_1,
-            .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
-        };
-
-        /* Install the UART driver */
-        uart_driver_install(UART_NUM_0, 256, 0, 0, NULL, 0);
-        uart_param_config(UART_NUM_0, &uart_config);
-
-        /* Asign VFS to UART */
-        //uart_vfs_dev_use_driver(UART_NUM_0);
-        esp_vfs_dev_uart_use_driver(UART_NUM_0);
-    #elif CONFIG_IDF_TARGET_ESP32C3
-        /* Minicom, screen, idf_monitor send CR when ENTER key is pressed */
-        esp_vfs_dev_usb_serial_jtag_set_rx_line_endings(ESP_LINE_ENDINGS_CR);
-
-        /* Move the caret to the beginning of the next line on '\n' */
-        esp_vfs_dev_usb_serial_jtag_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF);
-
-        usb_serial_jtag_driver_config_t usb_serial_jtag_config = USB_SERIAL_JTAG_DRIVER_CONFIG_DEFAULT();
-
-        /* Install USB-SERIAL-JTAG driver for interrupt-driven reads and writes */
-        ESP_ERROR_CHECK(usb_serial_jtag_driver_install(&usb_serial_jtag_config));
-
-        /* Asign vfs to JTAG */
-        esp_vfs_usb_serial_jtag_use_driver();
-    #endif
-
+    /* Minicom, screen, idf_monitor send CR when ENTER key is pressed */
+    esp_vfs_dev_usb_serial_jtag_set_rx_line_endings(ESP_LINE_ENDINGS_CR);
+    /* Move the caret to the beginning of the next line on '\n' */
+    esp_vfs_dev_usb_serial_jtag_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF);
     /* Enable non-blocking mode on stdin and stdout */
     fcntl(fileno(stdout), F_SETFL, 0);
     fcntl(fileno(stdin), F_SETFL, 0);
-
-    /* Configure the console */
+    usb_serial_jtag_driver_config_t usb_serial_jtag_config = USB_SERIAL_JTAG_DRIVER_CONFIG_DEFAULT();
+    /* Install USB-SERIAL-JTAG driver for interrupt-driven reads and writes */
+    ESP_ERROR_CHECK(usb_serial_jtag_driver_install(&usb_serial_jtag_config));
+    /* Tell vfs to use usb-serial-jtag driver */
+    esp_vfs_usb_serial_jtag_use_driver();
     console_config.max_cmdline_args = CONFIG_CONSOLE_MAX_CMDLINE_ARGS;
     console_config.max_cmdline_length = CONFIG_CONSOLE_MAX_CMDLINE_LENGTH;
     if (use_colors) console_config.hint_color = atoi(LOG_COLOR_CYAN);
-
-    /* Initializing */
     ESP_ERROR_CHECK(esp_console_init(&console_config));
-
-    /* Config library linenoise */
-    linenoiseSetMultiLine(1);
+    // linenoiseSetMultiLine(1);
     linenoiseSetCompletionCallback(&esp_console_get_completion);
     linenoiseSetHintsCallback((linenoiseHintsCallback*) &esp_console_get_hint);
     linenoiseHistorySetMaxLen(30);
     linenoiseSetMaxLineLen(console_config.max_cmdline_length);
     linenoiseHistoryLoad(HISTORY_PATH);
-
-    /* Record commands */
+    /* Register commands */
     esp_console_register_help_command();
     register_system();
     register_can_commands();